Do not lift or move loads that are not safe.
Make sure loads are correctly stacked and
positioned across both forks. Operate slowly
when moving long high or wide loads. Look
out for other persons or obstructions in your
path of travel.

Do not overload your truck or add extra
counterweight to the truck. Know the rated
capacity of your truck and its attachments.
Never exceed the rated capacities. An
overload can cause the truck to roll over
and cause injury to personnel and
damage to the lift truck.

Do not lift or move a load unless both forks are
fully under the load. Do not lift a load with one
fork. Position the forks as wide as possible
under the load. Handle loads carefully and
check them closely for stability and balance.
Remember, falling loads cause injury and
damage.

Observe all signs especially those on maximum
permitted floor loadings, elevator capacities and
clearance heights.

Be careful when operating a lift truck near the
edge of a loading dock or ramp. The truck can
fall over the edge and cause injury or death.
Keep a safe distance from the edge and use
caution when the floor is slippery.